How to prevent accidents when operating rotary kiln

Article source：

 

1 , check before driving tune whirl chamber kiln door is shut tight observation ; 2, check the direction of rotation of the 

impeller , from the direction of the feed inlet look . Impeller should rotate counterclockwise , otherwise adjust the motor 

wiring ; 3 , kiln must be unloaded start , to be operating normally before feeding Sand production line      , rotary kiln and transportation 

equipment start-up sequence is: → Discharge → kiln feed , stop with the boot sequence in reverse order ; 4 , feed particles 

strictly follow the regulations prohibit more than the specified material into the kiln , to avoid clogging the impeller center 

channel and feeding tube , feeding seek continuous and uniform ; 5 , stopping the discharge device when should promptly 

stop feeding ; 6 , kiln operation process, if severe vibration and abnormal noise , immediately stop checks ; 7 , when the kiln 

every working class , adding the right amount of grease ; machinery production is important, However, production safety is 

a top priority , safety is very important, so in addition to the use in the operation to ensure safe operation of equipment , 

but also to take protective measures to improve as much as possible , be sure to follow these seven requirements , in order 

to secure production guarantee efficient income . Please indicate Henan YuFeng Heavy Machinery