How to avoid shaking phenomenon jaw crusher

Article source：

How to avoid shaking phenomenon jaw crusher
Jaw crusher after a period of time , there will be violent shaking of the phenomenon , the user had to stop production, to identify the reasons for shaking repair the machine. In fact, as long as usual is likely to pay more attention to avoid downtime during production , then how can we effectively avoid the phenomenon of jaw crusher shake it ?

1 . Always check screw jaw crusher is loose or broken signs exist . Jaw crusher rely on the foundation of these screws , if the screws loose or broken, loose side of the machine will be a slight shaking occurred . If no timely tighten loose screws or replace broken screws, because it will lead to other shaking loose screw breakage or exacerbated the extent of shaking jaw crusher , and even cause damage to the machine .

2 Check the installation of foundation loose Belt Conveyer  has occurred . If the foundation jaw crusher is not strong enough , or long-term basis using the process, to loose , will affect the stability of the jaw crusher . So when you install the jaw crusher , we must lay the foundation , as the Red Star Heavy Industries said, preventive measures , preventive measures , and in the course of regular inspections after the foundation is loose, if loose timely reinforcement.

3 to observe the condition of flying tank . In the long-term process, jaw crusher fly inside the tank will slowly deviate from the original position , resulting in loss of balance , there shaking , severe it will damage the machine. Therefore, the use of jaw crusher during regular inspection of the main components is necessary , routine maintenance is not be ignored.

Juddering jaw crusher is not inevitable , as long as we pay attention during the operation , they can reduce the risk of this phenomenon , reduce equipment downtime caused economic losses , not to delay the progress of works .